| 产品名称：BS-4010 Fully automatic Multicolorous cartridge screen printing machine
产品型号：BS-4010
产品描述：
Brief Introduction:
Application:
Fully automatic multicolor silicone cartridge screen printing machine is made up of 1 set major printing machine and 2~3 sets ancillary printing machines. It contains: automatically cartridges feeding unit, automatically surface flame treatment unit, printing machine part and the UV drying furnace. It means that the machine can make a blank cartridge to be printed with 3~4 colors, and the printing ink is already dry after appearance from the UV drying furnace. It saves the traditional procedure of airing the cartridges. The printed cartridges can be directly sent to the filling workshop to be filled. This printing machine can be used for most of cylindrical plastic cartridges, bottles, glass bottles, metal-made containers.
Features:
This machine is also a very new design product, and it adopts several advanced special techniques. All-electric drive components and control system using a full set of components imported from Germany and Japan to ensure stable printing quality. . After several months back and forth detections, this machine can run very stablely, there is no collision phenomenon. In addition, structure of the silk screen part have been done strengthening treatment, so it’ll not not swing around, and make sure the sammeld ruck to be more accurate. As a result, the performances of printed packages are very vivid and nice. It can improve the image of your products. The machine is very suitable for the plastic cartrideg printing factories and the printing workshops of silicone sealant manufacturers and many other manufacturers.
The basic parameters:
|
Printing speed |
Around 4000pcs / hr |
|
Printing sizes |
Diameter: φ20-φ100mm; Length: 25-250mm |
|
UV lamp power |
4.0KW/pc |
|
UV exhaust blower power |
0.2KW |
|
Exhaust air rate |
11.6m3/min |
|
Single machine power |
0.75KW |
|
Compressed air pressure |
5 Bar |
|
Air flow |
1500L/min |
|
Reduction Gearbox Transmission Ratio |
1 : 7.5 |
|
Flame fuel processor |
Liquefied Petroleum Gas (LPG)
|
|
Printing machine dimension and weight |
Main printing machine:2600 × 1200 × 1600mm 1000kgs
Ancillary printing machine: 1900×1200×1600mm 800kgs
Ancillary printing machine: 1900×1200×1600mm 800kgs |
|
Automatic cartridge conveying loader(Optional) |
2850×1300×1500mm 480kgs |
|
Cartridge discharging inspecting table(Optional) |
2130×530×800mm 150kgs |
|
Electrical source |
Main and Ancillary printing machines: 380VAC, 3-phases, 100A |
|
Automatic cartridge conveying loader: 380VAC, 3-phases, 1Kva, 0.75KW |
|
Cartridge discharging inspecting table: 220VAC,1-phase,220VA | |
